BEST WAY TO USE THE RIGHT CHAINSAW OIL | CHAINSAW OILER GUIDE
A proper chainsaw oil is very important to your chainsaw for preserving its life for a long time. Your chainsaw oil will help you make easy decisions when you are purchasing the right type of oil and make it sure that your chainsaw is properly maintained.
Having a chainsaw is just like having a vehicle. Are you treating both of your toys in the same way at a time? I know you never forget to oil up your car because, if it happens your car can have a serious damage.
So, similarly, you have to treat your chainsaw in the same way. Here, we are going to tell you each and everything that you must know about chainsaw oil and will help you in understanding that how much oil is important to your chainsaw to keep it running for years.
Here are some recommended oils that are specially used for chainsaws:
WHY YOU NEED CHAINSAW OIL IN THE FIRST PLACE
The first reason you should use the chainsaw oil is for maintenance and for its working. You must be thinking that maintenance work is some kind of work that should be done manually, but the oil in your chainsaw will keep the power tool in working order automatically when you are using it. for this purpose, the chainsaw oil will work hard to keep the bar and chain working perfectly. Because, it is the main part of the machine that must be running continuously and properly and also needs attention, in case you do not want to run into any problems.
WHAT IS THE TYPICAL COMPOSITION OF CHAINSAW OIL
I know you have never attempted to put some motor oil in your chainsaw when you were running low on oil. Because they are totally different and it is a lot more than the lack of a weight classification setting them apart. Chainsaw oil is not always the same, but you will see some refined mineral oils blend. It will also include, inhibitors for oxidation and anti-wear corrosion also it will have a high tack additive added to help oil stick to the bar and chain when it is in operation.
THE TOP REASONS WHY CHAINSAW OIL IS ESSENTIAL
Now, I think you have a basic idea why you need oil for your chainsaw when you are going to buy it. But what exactly it will help you in? Here are the things listed that you will get if you are good enough to keep your chainsaw oiled up with the correct oil all the time.
- Reduces friction
- Prevents Clogging
- Keeps things clean
- Safety providence
- Protects environment
- Prolongs chain life
- Saves a lot of money
If you are using chainsaw oil then it is just like cutting butter with a hot knife. If you do not have the essential lubricant then you are going to be in a problem. It will create friction so bad that it is so hard to cut it through anything and going to take so long before something breaks. But when your chainsaw will be oiled up then it will cut through anything with great speed.
There is one thing you must be kept in mind that the chainsaw oil does not help you with the lubrication between the chainsaw and any wood that you are cutting. Basically, it is the friction between two things that will let you cut easily in the first place? The basic purpose of chain oil is to reduce friction of the chain because it spins around the bar at a great speed.
Actually, this is the thing about which people do not talk usually. Basically, it is a bad problem or a great issue during the wetter months because everything gets to stick to the chainsaw.
When the plants fluid and waste from whatever and wherever you are cutting suddenly clogs up the chainsaw. You will need to clean it away while you are working outside. Some manufacturers offer the best chainsaw oil and if you are using it then it will surely reduce your amount of clogging in the first place.
KEEPS THINGS CLEAN
We have talked before about the enhanced high tack additive you will ever find in the chainsaw oil. And I think this is the main reason why you should not use any other oil and should not be fooled. Because it will assure you that the oil perfectly sticks to the bar and chain for making it properly working machine. And when you do not have oil flying everywhere it will keep things clean and dust free. Moreover, it will also help you to make the chainsaw last longer just because once the oil disappears then it cannot do anything to reduce friction.
OFFERS YOU SAFETY
There is one other important point to keep in mind that whenever you are operating your chainsaw you must use the proper safety equipment always, and it includes googles which keep your eyes safe from wooden chips. I am positive, and you are still not so interested in ending up with a barrage of oil splattered on your face. And that may happen when it is not designed to stick to the chainsaw. It may end up blocking your sight and may also lead to an accident so, you must cover your face while doing this.
You must keep your safety but you should also keep environment under observation and make it clean. You can throw some oils outside that do not cause any harm but still, it is not right. But some oils like petroleum-based oils are actually not good for nature also. That does not mean that you cannot use these type of oils, you can surely use them but you should not use any oil that ends up everywhere as you turn your chainsaw anywhere. If oil does not stick to your chainsaw or power tool it is going to put you in trouble because it can have splattered off anywhere you can think of.
PROLONGS CHAIN LIFE
A regular person who works in the home never wants to spend his or her time on cleaning the chains or sharpening it. But it may come with the job if you take this thing as a job or your profession. But a normal person wants to cut wood whenever the time comes without any trouble and when a chain is not sharp enough to cut properly. Making your chain reliable means using the best oil for your chain. When you are dealing with the dangerous things it will equal less work which is easy for you as well especially in a long run.
SAVE LOTS OF MONEY
Actually, the chainsaw oil is not so cheap like the oils you can be made in your home but you will have to ask yourself that if it is worth the short terms gains. Finally, your chainsaw will gradually lose its energy or break and you will need much money to get it fixed. If you will take this on a serious note then you will come to know that chainsaw oil will last longer, you are just saving a little bit when you use a cheaper oil. And then it is going to catch up to you so, it is always a good choice to use a better oil.
HOW TO KNOW YOUR CHAINSAW OIL IS WORKING?
We should thank the modern chainsaws for offering continuous lubricants to the bars and chains and that means you do not need to think about it while you are working. Unluckily, it will work only if everything is going smoothly in the first place. Your chainsaw will be going to burn really quick if it does not get the oil that is needed to it. The easiest way to test it is that holds your chainsaw six to eight inches away from something. It might have sticky oil on it, but still, you will see a line of it on the wood under you.
HOW IS CHAINSAW OIL CLASSIFIED?
- Summer oil- Heavier
- Winter oil- Lightweight
The oil you need in summers for your chainsaw should be very sticky or thicker because if it would not then it can easily fly off from your machine.
The oil used in winters is thinner because of some reasons. It will also help you pour it into the chainsaw easily, and it will yet circulate in cold temperatures.
We have talked before about the chainsaw oils that how they do not follow the same weight classification that you people find in other oils, though, they are not of the same weight. Instead, they are broken down into summer and winter varieties. It is because in summers the heat from the sun will thin the oil, on the other hand, in winters the cold air will thicken the oil. So, if you do not use the oil you need at the right time then you can have a severe damage to your chai due to the dry saw. But still, there are some decisions you should take even if it is broken that what oil you should buy.
Here, if you are spending too much time in searching that which oil is best then I am going out, and suppose you already have a particular machine. Even if you do not have the user manual and you just threw it somewhere then still not to worry you will yet be able to do some research by looking at the chainsaw brand and ongoing their website or by calling up their customer service department. They will recommend you the best oil for your chainsaw that you will be using at the time.
DO YOU NEED TO USE A SPECIFIC BRAND OF CHAINSAW OIL?
All the big brands have their own proprietary blends of chainsaw oil. And you can buy these at a slightly high price. That makes people surprised that if they should use the oil which is being recommended in the instruction manual, or whether they would go for something more affordable. Being honest, there is not an easy answer to this question. Let us have a look at some biggest reasons that why you might go for the brand name chainsaw oil instead of the one you have never heard before.
- Brand loyalty
- Fewer contaminants
- Long lasting
Now, you must have a good idea that why chainsaw oil is much important to the machines for a number of reasons. When you know that there could be any problem regarding your chainsaw then do you really want to take a risk with the oil you don’t even know about? Your chainsaw might have served you for years, so, you will know the oil the manufacturers sell will likely use those same standards. If you are honest with your manufacturer, then it is a big risk to use some other oil that your manufacturer never recommends you.
As I already said above that your chainsaw oil is a mixture of recycled oils and some additives. I know you want the oil as pure as possible, so genuinely there should not be many contaminants. If you will buy a generic chainsaw oil then it is going to work right. But it might not work well because your manufacturer recommends you some other oil. The price actually the extra price you pay for the brand name chainsaw oil is just like the result of the process they use to get rid of as many contaminants as they can.
It Is being noted that brand name chainsaw oil usually lasts longer than its generic parallels. It is usually because they contain more additives and that is a good thing if you really care about your chainsaw. A Tackifier is the big additive brand name oils are commonly filled with, which will do everything it can do to keep the oil between the groove and chain. Thus, these oils are much better than the others.
There is a tip I must tell you, if you own a chainsaw or buy it then you must have a look on the instruction manual or user manual, to see what they say about the chainsaw oil. If you do not follow the instructions you could void the warranty, and though it is unlikely to happen you should always check with the particular manufacturer to make sure.
LOOKING TOWARDS THE FUTURE: BIO-OILS
At the moment, petroleum-based oils are very prominent. But chainsaw oils took a good position in few years. There is currently a lot of hype surrounding bio-oils, which are made up of cold pressed vegetable oils. There is the main reason we are moving towards the environmental-friendly chainsaw oils is thanks to how the machine actually works. Just in case, you do not know about it, they are considered a total loss system. Ans that mean every last drop of oil is going to absorb in your body and in an environment.
Whether, if it is not sprayed on your skin and when it is sprayed off the bar or inhaled when î is misted off, it causes the bad effect on the environment. If could even destroy your outdoor things like your plants in the garden etc. So, it is only a matter or discussion of time before we tried to come up with an alternative solution. Many companies started to manufacture bio-oils and some of them are extremely biodegradable. Actually, up to ninety percent of oil degrades in a matter of weeks. And they will work as the alternatives.
HOW TO FILL UP YOUR OIL RESERVOIR?
Usually, a normal gas power chainsaw will go through hardly one tank of chainsaw oil for every tank of fuel you put in. And it totally depends on the type of chainsaw that you are using. But it is considered a good habit that you will need to top up your oil every single time you need to fill it with fuel. That will stop anything from going bad but firstly you will need to know how to fill up your reservoir correctly.
- Lay your chainsaw flat on the ground
- Unscrew cap and pour oil inside
- Put on cap and wipe away any spillages
LAY YOUR CHAINSAW FLAT ON THE GROUND
At this point, your chainsaw is obviously turned off for your own safety. You will need to lay it flat on the ground on an even surface. If you do not have a big garden then you must take it inside to lay it on your workbench.
UNSCREW CAP AND POUR OIL INSIDE
After you have made sure that you are using the right oil, you will need to fill up the reservoir after you unscrewed the cap. Try to make it fill at the top as possible without spill it outside
PUT ON CAP AND WIPE AWAY ANY SPILLAGES
There, shaky hands mean that there could be oil running down the side of your chainsaw, even if you have not overfilled the reservoir. You have to make sure that even the last drop should be wiped out and when you are done you are ready to go.
WORKING WITH A 2-STROKE CHAINSAW ENGINE
Until now, we have only discussed working with the bar and chain oil. But there something else you have to take it on a serious note. If you have a chainsaw with a 2-stroke engine it is actually important you absorb this information. Before something else you should know that in a 4-stroke engine the lubrication system works separately and you can fill it with gas without any trouble. But on a 2-stroke engine, if you do not mix your oil and gas then you will not get a good lubricant.
It will be destroyed within minutes, so it is quite critical to mix the gas with the oil before you poured into the machine. You will need to read the user a manual, or instruction manual to check the exact ratio of these to use them. But to give you a quick example or ratio it is almost one gallon of gas for every 2.6 ounces of 2-stroke engine oil. There are few things to keep in mind while doing this which are stated below.
- Do not pour directly into the chainsaw
- The accuracy of your fuel mixture
- Keep the chainsaw in a well-ventilated area
- Make sure you shake the mixture
- Never refuel when it is too hot
- Air cooled versus water cooled engines
- Do not use your 2-stroke oil in a reservoir
DON’T POUR DIRECTLY INTO THE CHAINSAW
Now you should know the exact amount of mixture of oil and gas you pour into the machine. But just you have got the exact amounts sitting there you cannot pour them directly into the chainsaw. You have to mix them in a gas can before they are ready to be poured inside. Let start by filling the container filled half with the gas and put oil on the top half of it. And the remaining gas can be added before you give it a good shake for around 15-20 seconds.
THE ACCURACY OF YOUR FUEL MIXTURE
When you are given with a ratio of the amount of oil and gas to make a mixture then it is too easy to think you can mix up a formula based loosely on the exact numbers you have been given. Actually, these numbers are very important because, if you do not stick to them then your chainsaw can have issues. I know we haven’t talked about it earlier, but you must use the correct gas with the chainsaw oil to prevent any problems and harms.
There is a pro-tip, that you can draw lines on your gas can with a permanent marker when you are going to mix oil and gas. It will help you in mixing the chainsaw oil with gas in the exact ratio.
KEEP THE CHAINSAW IN A WELL-VENTILATED AREA
One of the best things about electronic chainsaws is that it does not discharge dangerous fumes into the air. While when you have a gas-powered chainsaw then this is something to have to live with, even if there is a protective gear to keep you safe. The most dangerous part is when people start mixing the gas with the chainsaw oil and do not wear protection. And even if you wear protection, you have to do this in a well-ventilated area.
MAKE SURE YOU SHAKE THE MIXTURE
We have already said that you must shake it well before assembling it in the first place. But remember you have to shake it on regular basis. Even every time you want to fill up your tank you have to shake it well. It is important because gas and oil will begin to separate after some time which can cause problems.
NEVER REFUEL WHEN IT IS TOO HOT
You must have known that you cannot fill up anything when the chainsaw is running. But also, you have to make sure it should not be boiling hot. I know it is going to be a big problem whenever you need to refuel your tank half way through cutting logs. But I think it is better to stay n safe side. You do not have to let it cool completely.
AIR COOLED VERSUS WATER COOLED ENGINES
Some chainsaw engines are water cooled while some are air cooled. It does not matter which engine you use, but it will affect which chainsaw oil you use for them. For example, if your engine is air cooled you should not use oil designed for water cooled engines and vice versa. These instructions are also mentioned in a user manual. And once you find the best oil for the engine that suits it then you can prevent many hazards.
DO NOT USE YOUR 2-STROKE OIL IN RESERVOIR
As we have discussed and covered many types of chainsaw oils. You have the kind you will put in your reservoir to lubricate the bar and chain. But you have also the 2-stroke oil you need to mix with gas in 2-stroke engines. It is really difficult to see the difference between these two, but by just knowing you will not be able to put your 2-stroke oil in your reservoir for your bar and chain. We have already mentioned about the special properties in bar oil that you will not see in engine oil.
COMMON PROBLEMS STARTING YOUR ENGINE
There could be many reasons your engine could not start at the first time. Some people forget to turn the switch on but there can be many problems more complexed than this one. Here we are only discussing the oil-related problems you might experience. They are a lot more common than you think. So, make sure you keep these things in mind so that whenever you have these problems or issue you can solve them easily.
- The mixture is older than 30 days
- Your engine is a little flooded
THE MIXTURE IS OLDER THEN 30 DAYS
You know you have to make sure that it is much important to shake the mixture before pouring it into your chainsaw. But make sure you never use the mixture after a month. If you are using a mixture which is older than a month then your engine will not start and there could be an issue. If you have that much older fuel then spill it out and start making a new mixture which is fresh to use it on your machine.
YOUR ENGINE IS A LITTLE FLOODED
Sometimes you might have poured too much oil in your engine accidently. If you never care about it then possibly you may have missed your fuel tank too. If your engine is flooded and you are trying to start it then there may be issues while starting and in fact more chances not to start. There are many things you can do if your engine is flooded if it happens then let the fuel sit at least for 30 minutes to let the fuel evaporate in the air.
A COMPLETE OVERVIEW OF CHAINSAW OIL
Now, you must feel confident, that you know everything about chainsaw oil. At least it will help you in future. I hope you will remember that your oil must be topped up all the time. If you are lucky, then surely this will help you with your chainsaw for working it perfectly as long as possible. You must also keep in mind that it is pointless saving money if it is only going to cost you a lot more in long-term.